Description
Very short, simple minimalist signal path. All-tube design. 2 x 12AT7 + 2 x 7044
Generous energy storage via large power supply capacitors.
No global feedback. [Some local feedback]
Non-inverting two-tube gain stage is direct-coupled.Cool white-follower output.
Filament supply floated 80V above chassis ground for quieter operationand longer tube life.
NOBLE audiophile-grade level and balance pots.
MIT/MutilCap polypropylene audiophile-grade signal coupling capacitors, including two 30 uF monsters on the output stages.
Warm-up delay / MUTE button. Features and quality components usuallynot found on entry-level pieces.
Specifications
- Vacuum Tubes: input tubes: 2 x 12AT7WA , output tubes 2 x 7044
- Five line level inputs unbalanced RCA
- MUTE switch and Warm-Up muting delay
- Accurately tracking NOBLE volume control within 0.25dB
- Center detented NOBLE balance control
- Record Output
- Two sets of unbalanced RCA main outs
- Gain 11.8dB
- Input sensitivity 200mV in yields 1V out
- Frequency response: 10 Hz - 80 KHz
- Noise Floor Typically -95 dB A WGT 20-20K with volume control fully open
- Noise Floor (shorted input) Typically -106 dB A WGT 20-20K with volume control fully closed
- S/N ratio: typically 95 dB A WGT 20-20K
- Input Impedance: 250 Kohm
- Output impedance: 50 ohms
- Maximum Output: +26dBu @ 1.5% THD into 100K load (15.5V rms)
- Maximum Output: +21dBm @ 1.5% THD into 600 ohm load
- Power Consumption: 55 Watts (485mA @ 120VAC)
- Dimensions: W=19", L=11", H=3 1/2"
- Shipping weight: 15 Ibs.
 PDF Files
{Download Owners Manual}
|
