Manley SLAM! Stereo Limiter Mastering Version
Including vat
Best possible pricing - ALWAYS - please call us or email if in any doubt!
Manley Slam Stereo Limiter and Mic Preamplifier Mastering Version

Product Details

The mastering version of Manley's SLAM! differs from the 'regular' SLAM! in a number of ways. There are no microphone preamps or instrument inputs and the tube sections are paralleled for lower noise and distortion.

All pots are replaced with rotary switches for detented resets and easier calibration and the unit has a true hard-wire bypass function (this is not possible on the regular version with mic preamps)

No separate L & R bypass buttons. What was the Left Bypass on the 'regular' unit becomes the full Bypass (in both stereo and hardwired). The right Bypass button becomes the Limiter Bypass (tubes & transformers still active)

There are dedicated unbalanced transformerless inputs. What was the Phantom Power switch on the rear panel, here selects XLR or 1/4” jaxck inputs.

The ELOP® limiter has 5 ratios, which may put it into the compressor/ limiter category. You'll find the lower ratios better suited to complex mixes. The FET limiter has 5 modes (these last two features replace the INPUT selector on the 'regular' unit).

Mastering versions calibrate the digital option for +14dBu =DFS rather than +16 dBu.

Further information about this Mastering SLAM! can be found at Manley's website.

Technical Specifications

Input Tubes: 2 x 12AT7A NOS GE selected by Manley Labs
Output Tubes: 2 x 6414W NOS USA dual triodes
I/O: MANLEY transformer coupled Balanced Inputs and Outputs
Gain: 20dB max Limiter Gain

Input Impedance: 
FET Limiter: Attack: approx. 100μS; Release: 10mS to 2Sec; Ratio: better than 20:1
ELOP Limiter: Attack: approx. 10mS for 6dB GR; Release: 2.5 Sec; Ratio: 10:1

DAC:AES 24Bit 192KHz upsampling from 44.1, 48, 88.2, & 96KHz
A to D: 24Bit 96KHz (for now)
Frequency Response: 5Hz to 60KHz
Maximum Output : +32dBm, +30dBm (into 1KΩ load)
THD+N: <.05% @ 1KHz 
Dynamic Range: 115dB typical
Output Impedance: 200Ω

Power Consumption Slam! Analog: 
  0.480 Amps (480 milliamps = 480mA) @ 120V = 57.6 Watts
  0.240 Amps (240 milliamps = 240mA) @ 240V = 57.6 Watts

Power Consumption Slam! Digital:
  0.688 Amps (688 milliamps = 688mA) @ 120V = 82.56 Watts
  0.344 Amps (344 milliamps = 344mA) @ 240V = 82.56 Watts

Outboard PSU factory set for 220-240VAC operation (UK)
Mains Voltage Frequency: 50~ 60Hz
Size: 19” X 12” X 3.5” (occupies 2u)
Shipping Weight: 11.5kg/25lb

Owners Manual

Owners Manual  Download Owners Manual

© Sable Marketing | Firemouth Web Design